Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob stopped working one day, it could be due to a dead battery in the coin, water damage, receiver module issues or a faulty electronic chip. These are all simple fixes and you can bring your car back to speed in no time!
Car keys can also get damaged because the blade of the key gets worn. This is an easy fix to fix the problem if you go to your local Car Key Man Auto Locksmith and let them fit an entirely new key blade for you.
Battery
The battery of the key fob in your Peugeot 308 can sometimes die or become insufficient to send an energizing signal to the car. This can cause the key fob to stop functioning which prevents you from locking or opening the doors or starting your engine. To fix this issue, you'll need to replace the battery on your key fob.
You'll have to purchase a new battery from an auto parts store or at your local hardware store. Make sure the battery is brand new and not on the counter for too long. A brand new battery has more capacity and will transmit a stronger signal to your vehicle.
After replacing the battery, try unlocking the doors and locking them with the key fob. If the doors won't unlock it's possible that the receiver module inside the car is the cause. The local Peugeot dealer can reprogramme the receiver module.
It's possible that the chip inside your key fob is damaged. You could damage your key fob if you drop it on the ground or expose it to water. Rubber seals that shield your chip from moisture may wear out over time. This is especially the case when you expose your key fob to water over long periods of time, such as submerging it in the ocean. To prevent this from happening you should keep your key fob out of water and out of water.
Water Damage
If your key fob gets wet and soaked, whether you dropped it in the pool or fumbled it into the puddle, don't believe it's a case of lost cause. Although the key fob is equipped with rubber seals which should shield it from water, prolonged exposure to water can lead to damage to its electronic chip. Water is a good conductor and any water that gets inside the key fob will cause a series short circuits which can eventually harm the electronic chip. After removing the batteries clean the contacts using isopropyl. Dry them completely before putting them back into.
A dead battery can also be the reason that your Peugeot 308 won't start. If you have a spare vehicle, jumper cables can be used to start the engine again. If the battery is causing the problem the battery will need to be replaced.
A defective receiver in your car may also hinder it from receiving the signal from the key fob. It could be a problem with the antenna or wiring, or the key fob could be damaged. If peugeot 3008 key fob are using the latest key fob, it might need to be programmed for the vehicle. If you cannot solve the issue yourself, contact an expert technician. A trained technician in the field will be able to diagnose the problem quickly, and resolve it quickly.
Radio Interference
The signs of a keys not being recognized or having a limited range typically indicate that there is a problem in the system. The interference could be transmitted or radiated the latter resulting from power and speaker cables that are too close to electrical components. In general, rerouting cables and moving them away from these components will fix the problem.
It's unlikely that someone is monitoring the signals from your key fob to steal your car, but it's possible that the signal has been muffled by radio frequency interference. Fortunately, this is easy to repair.
If your key fob isn't being recognized by the system, you can try a new battery. Make sure the battery is of the correct size and type. Incorrectly sized batteries can damage the fob.
Some alarm systems that are sold on the market and radar detectors operate on the same radio frequency as your key fob, which can cause them to interfere with your key signals. It is recommended to avoid attaching these devices to your key fob.
Pairing Issues
The remote keyless entry system that is used in the car is equipped with a receiver that receives radio signals from the key fob. If the receiver has developed problems, you won't be capable of starting your car, even if the key fob works and is modified. This problem can be caused in a number different ways, such as an inoperative battery on the coin-cell or water damage. The receiver may also be malfunctioning due to a software issue or internal damage in the key.
One of the main reasons that your Peugeot 308 key fob isn't working is that the coin battery inside has failed. It is easy to replace it with a new battery, but it is important to get the right battery for your key fob. If you use a battery that is not correct, it could cause further issues with the key fob, therefore it's best to use the original battery or an alternative that is similar in size, voltage, and specification.
Your Peugeot 308 keyfob may not work if it has been connected to another vehicle. You might have accidentally given your key fob to a friend or the key was used to unlock other vehicles. This issue can be solved by reprogramming your key fob with an OBDII scan. This tool will ask for details about your car, for example, its VIN or engine type. It is crucial that you enter the correct information.